outbound call to POTS hangup after 5 rings

hello:
please check this:
Dial(type/identifier,timeout,options)
in your trixbox, you may check the ring time. by default, it should be 90 by freepbx.

Hi Zames.

Where is that Ring time located in trixbox. I couldnot find in trixbox setting page.

Hi bishal:
I think you can try this:
1) Log into the web GUI
2) Select "System Administration"
3) Select "Config Edit"
4) Click "extensions_additional.conf"
5) Under "[globals]" change "RINGTIMER=xxxx" to suit the time you want it to ring

i] Last edited by xin.liu at 2010-3-19 16:15 [/i

Hi Xin,

I edited the extension_additional.conf from web gui and change the Ring Timer from 15 to 60. But still 4 rings goes and busy tone.

Hi bishal:
After you change it ,you must ran the cmmand "reload" in the CLI console.
If it still has issue ,you can change it to a higher number.

i] Last edited by xin.liu at 2010-3-19 17:45 [/i

I reloaded the asterisk with reload command and even rebooted the asterisk server. but still not success.

[globals]
#include globals_custom.conf
CALLFILENAME = ""
DIAL_OPTIONS = tr
TRUNK_OPTIONS =
DIAL_OUT = 9
FAX =
FAX_RX = system
FAX_RX_EMAIL = This email address is being protected from spambots. You need JavaScript enabled to view it.
FAX_RX_FROM = This email address is being protected from spambots. You need JavaScript enabled to view it.
INCOMING = group-all
NULL = ""
OPERATOR =
OPERATOR_XTN =
PARKNOTIFY = SIP/200
RECORDEXTEN = ""
RINGTIMER = 100
DIRECTORY = last
====

Debug log:

-- Executing [s@macro-dialout-trunk:17] Macro("SIP/6000-b790cbf8", "dialout-trunk-predial-hook|") in new stack
[Mar 19 15:45:11] WARNING[3813]: app_macro.c:214 _macro_exec: Context 'macro-dialout-trunk-predial-hook' for macro 'dialout-trunk-predial-hook' lacks 's' extension, priority 1
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/6000-b790cbf8", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/6000-b790cbf8", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:20] Dial("SIP/6000-b790cbf8", "ZAP/g0/545384|300|") in new stack
-- Called g0/545384